Table of Contents
Ease of use9
In August 2021, the Artillery Genius Pro, an improvement of the company’s popular Genius 3D printer, was released alongside the Sidewinder X2.
As its name suggests, the Artillery Genius Pro is an enhanced Artillery Genius, with some changes making it a little smarter and others boosting safety. It’s given the Pro a lot of hardware value for only a $60 price increase over its predecessor. The original Genius was a superb printer, and Artillery has proved that it values customer feedback when upgrading its technology.
The Genius Pro includes several of our favorite features, the greatest of which were previously present in the original Genius. The Genius Pro’s fast-heating AC print bed heats up quickly. The Genius Pro maintains the low-noise experience we’ve had with earlier Artillery devices. Other feature updates were significant, but we found the Genius Pro to fall short of our expectations.
Artillery Genius Pro Review AUTOMATIC BED LEVELING
Though the original Genius allowed for the addition of a touch probe, the Genius Pro comes with a BLTouch-like probe right out of the box.
The bed isn’t permanent, so it doesn’t feel entirely “freeing you from complex manual leveling.” Still, it will help reduce maintenance by quickly producing a 9-point digital mesh that allows the printer maintains a consistent distance from the print bed. Artillery has included a space to simply attach a Z-end stop if you like a hard switch.
Artillery Genius Pro Review POWER OUTAGE AND FILAMENT SENSOR
A filament sensor and power-loss print recovery are also included in the Genius Pro. These features should keep you operating reliably if you’re running a lot of prints – like in a print farm–and can’t spare the time to monitor your remaining Best 3D Printing Filamentfilament.
These features were present in the original Genius and aren’t high on our priority list. The level of protection increases exponentially as the number of printers increases, so it’s a helpful tool for people with larger businesses. After all, your print will likely be ruined if the power goes out for an extended period. It can, however, save you from the inconvenient inconveniences of power flickers.
Artillery Genius Pro Review IN-HOUSE 32-BIT MAINBOARD
Artillery has responded to the call to move beyond the 8-bit mainboards of the past by developing its own 32-bit “Ruby” mainboard in-house. After being used in the low-cost Artillery Hornet, the board has been used in all of the company’s future products.
If you decide to add more user upgrades, you should have plenty of room for these new brains.
Artillery Genius Pro Review RIGID Z-AXIS CARRIAGE
The original Genius had a problematic Z-axis. The Artillery had installed some proprietary Z-couplers on it, which helped mitigate the problem but didn’t completely solve it. The Genius Pro has addressed that issue, adding a robust metal casing to the Z-axis V-slot wheels to improve the system’s stability. We like the Z-carriages and think they perform an excellent job.
Artillery Genius Pro Review FAST-HEATING PRINT BED
The Genius Pro features Artillery’s signature fast-heating AC print bed. We enjoyed the fast-heating feature, which we found to more or less live up to the company’s claims, reaching 70 °C in approximately two minutes and 100 °C in three and a half minutes.
The bed allows for a quick start to printing tasks, but it does so at the expense of temperature homogeneity, which has been a problem in the past.
Artillery Genius Pro Review ADDITIONAL FEATURES
The Artillery Genius Pro also has the following features:
Titan direct drive extruder – Artillery’s Titan-style direct extruder is included with the Genius Pro. If you want to print on various unique materials, the Genius Pro is a great choice.
Touchscreen UI – The system’s colorful touchscreen UI, which we thought to be appropriately intuitive in its previous form, has been retained. It’s a minor feature, but it’s beneficial.
Quiet Operation – Quiet operation is provided by the printer’s “ultra-quiet stepper motors.” Artillery has a reputation for producing extremely quiet printers. We continue to be blown away by how quiet they are.
Clean Cabling – Clean Cabling: The clean look of Artillery’s 3D printers has quickly become one of the company’s trademarks. The Genius Pro has a well-managed ribbon cable with strain relief already installed, which solves some of the cable problems.
Voltage Switch – The Genius Pro comes with a new power supply with a switch to vary the voltage between 100 and 240 volts, which is probably more of a production efficiency than a helpful feature, but it’s still interesting. It won’t change how you print, but it will ensure that you don’t get the wrong unit.
Artillery Genius Pro Review
- Technology: Fused deposition modeling (FDM)
- Year: 2021
- Assembly: Pre-assembled
- Mechanical Arrangement: Cartesian-XY-Head
- Manufacturer: Artillery
3D PRINTER PROPERTIES
- Build Volume: 220 x 220 x 250 mm
- Feeder System: Direct
- Print head: Single nozzle
- Nozzle size: 0.4 mm
- Max. hot end temperature: 260 °C
- Max. heated bed temperature: 130 °C
- Print bed material: Tempered Glass
- Frame: Aluminum
- Bed leveling: Automatic Touch Probe
- Connectivity: USB, microSD
- Print recovery: Yes
- Filament sensor: Yes
- Camera: No
- Filament diameter: 1.75 mm
- Third-party filament: Yes
- Filament materials: PLA, ABS, Flexible PLA, Wood, PVA, HIPS
DIMENSIONS AND WEIGHT
- Frame dimensions: 430 x 390 x 590 mm
- Weight: 9.6 kg
Is Artillery Genius Pro Worth Buying?
You can find all3dp.com conclusions below also there is another conclusion from Latest in Tech.
all3dp’s Artillery Genius Pro Conclusion
Artillery’s Genius Pro is a feature-rich 3D printer for a reasonable budget price of ~$340 with an average-sized build volume of 220 x 220 x 250 mm – which is not tall enough to suffer from too much shaking due to the horizontally aligned screws on its unbraced frame as we found the taller variant of this printer did.
Where the Genius Pro suffers is its ununiform bed temperature and poorly aligned layers.
Artillery’s otherwise standout fast-heating AC tempered-glass print beds have suffered from poor thermal uniformity across all Artillery’s products and are further hindered by the build plate’s adhesion to the printer’s heat pad – making the surface difficult to clean and replace. Artillery could benefit from swapping the single-piece tempered glass top out in favor of an aluminum heat plate and clipped glass that allows users to swap out surfaces and clean more easily.
Layer misalignment was by far the worst issue we experienced with the Genius Pro. Worse yet, we failed to identify the cause. We have a few remaining suspicions but, having already spent an inordinate measure of time with this product, stopped ourselves from pursuing it further. Normal and more involved calibrations failed to resolve the issue, and we are left with the necessary assumption that this is a QA problem. Given the unrelated but otherwise odd behavior we experienced with our other recent Artillery 3D printer review, we suspect QA is a larger issue at Artillery.
Insofar as cooling is concerned, its construction needs work. The Genius Pro’s stock vents fall out easily and may cause damage to the surrounding fan casing, as it did in our case. More still, we feel the duct could be directing air better. Though we have no complaints about its performance with overhangs, some members of the community have blamed the system’s layer issues on the duct and its poorly directed airflow.
Ultimately, the Genius Pro may be worth it – if you’re comfortable with a large amount of troubleshooting and disassembling your new 3D printer should you need to. If that’s the case, the price is right for a great set of features and you can easily mod what’s missing.
Digital manufacturing experts’ Artillery Genius 3D Printer Conclusion
The Artillery Genius is a budget-friendly desktop FFF/FDM 3D printer that offers decent build volume, wide material compatibility, and a handful of other features for a streamlined printing experience. It is equipped with a direct drive extruder that can heat up to 240°C and a heated build plate that can reach 130°C in less than three minutes. The Genius ships in a semi-assembled state, so it has to be assembled and calibrated manually. It indeed has some flaws in its design, but nothing comes as too hard to fix since the machine is highly upgradeable. This 3D printer would be good for both entry-level and experienced makers as well as some semi-professional applications. You can use the Artillery Genius to print uniquely designed household items, tabletop figurines and miniatures, cosplay accessories, props, hard-to-break prototypes, and much more.
You can purchase the Artillery Genius at Top 3D Shop. This affordable FDM 3D printer comes with the manufacturer’s warranty. Besides, our team will make sure to provide the best service possible, just like we always do.
Latest in Tech Artillery Genius Pro 3D Printer Review Summary
The Genius Pro is an impressive product that offers the same quality as the original Genius. But what makes it better is its new and improved features.
With its 32-bit mainboard, silent motor drivers, glass bed, touch screen, and filament sensor, it’s definitely a great product. And while it inherits most of its predecessor’s features, it also comes with a lot of improvements. All of these make the Genius Pro worth the price compared to other 3D printers on the market.
Overall, we were extremely satisfied with Artillery’s Genius Pro and we highly recommend it. This 3D printer is best if you want an FDM printer that’s easy to use. To get your hands on this product, you can purchase it from Artillery’s official website or from the official AliExpress store here.